Posts Tagged Auto Glass Safety

“Follow-up” Interview with Sika Corporation’s John King (who is retiring)

John King is retiring this year as the Vice President – Aftermarket at Sika Corporation. In his role at Sika John has been a key influencer in the auto glass repair and replacement (AGRR) industry both in North America and the world. I wanted to get John’s thoughts on the industry prior to his retirement and he agreed to talk.

JK head shot 3

Thank you for taking the time to talk again John. I know that you’re going through some changes in your life. You saw an auto glass installation for the first time in 1997 and a lot has changed since then to today. As you prepare to depart an active role in the AGRR industry can you tell us your view of the state of the industry as it relates to the safe installation of auto glass?

            John King:  For Auto Glass Retailers that continue to provide their Customers with Safe and Cost Effective Glass Replacement and Repairs, the future is bright, as there will always be a need for quality work.

Do you feel that there are more safe installations done today for consumers versus when you first entered the industry in 1997?

            John King:  Statistics like this are difficult to define, as it becomes more of an observation and opinion, than fact based.  However, Economics always drive business decisions, and unfortunately, for the Auto Glass Industry, the Economics of today are much more stressful, than in 1997.  For a number of reasons, the size of the Replacement Industry has shrunk over the past 7 years, resulting in a competitive climate that has far too many Glass Shop Companies and Independent One-Off Installers making Installation decisions based solely on the Revenue then need to survive.  When that happens, Safe Installations take a back seat, to getting the job done cheaply.  While “cheaply” does not necessarily mean incorrectly, it can mean that shortcuts in an installation may occur; “Slipping the Cowls, Short Urethane Beads, Incorrect Use of Priming Systems, No use of Priming Systems, and Not Holding the Vehicle until it is safe to Drive, are all symptoms of an unsafe installation”. 

            Unfortunately, I still believe that far too many Installers sacrifice a Complete Job, for a Quick Job.  Therefore, my answer is that today, that are still far too many unsafe installations being done. 

            On the bright side, those Shops and Installers that are doing a Complete Job, have vastly improved since 1997.  There is more adequate training available today, and for quality installers, who have kept up with training, and who are using the latest technologies of Urethane and Installation Equipment that better equip the Technician for making a Safer Installation, they are light years ahead of the best installs of 1997.

Do you think more needs to be done to ensure that replacements are being done correctly and are there any further steps you feel should be taken to ensure that auto glass is installed safely?

            John King:  No one likes or wants Government Intervention.  However, unless the Industry takes it upon themselves to collectively raise the “bar of performance” when it comes to proper installations, it will only take a high profile auto glass installation related death, to raise the awareness of the Public and those that Govern to actively do something about it.. The Television Program 20-20, that aired 12 years or so ago, raised awareness for a period of time, but unfortunately, that awareness petered out and the public is still at risk.  Quality Glass Shops who can “prove” to the Insurance Industry that they do perform Safe Installations, will be rewarded with business in that segment of the market.  Glass Shops who implement and use “Net Promoter Scores” and track their Customers’ Satisfaction and Continue to Train their Technicians will be doing what the Consumers need them to be doing.

            The Cash Market is another issue, and because it is structured differently and because there is “little to no quality barriers” for someone to enter the Auto Glass Industry, Consumers that utilize the Cash Market vs. the Insurance Market are subject to the unknown. 

Have you any advice or hopes for the industry?

            John King:  Again, there will always be a need for Quality Work in an Industry.  Just look at what 2014 has brought to the Automobile Manufacturers, with record numbers of Recalls. Consumers now have the lowest confidence ratings ever for Car Companies and those Manufacturers will only change that conception when Recalls are reduced.  Auto Glass Retailers, Glass Manufacturers, Installation Equipment Makers and Urethane Producers need to work together to ensure the Public gets quality installations.  There are many great people within the Auto Glass Industry and I believe that those committed to providing Safety will win their fair share.

Fill in the name of who is replacing you at Sika. I know that you’ve been transitioning him into your role as you are nearing retirement. Will there be any changes in direction for Sika?

            John King:  Mr. Marius Mavrodin replaced me, effective July 1, 2014, although I have still been consulted on important issues.  That followed 5-6 months of us working very closely together so that he understood the Industry and our Customer Needs as much as possible. Marius has been with Sika for a number of years, so he knows our capabilities and he is blessed with an Organization that works very hard to provide Quality Products, Services and Support to our Customers.  I know there is still room for improvement in what we do and Marius will lead this cause.

As an avid golfer I’m sure golf will play a major role in your retirement. Do you have any other plans you’d care to share?

            John King:  For the short term, my wife Marilyn and I will take a couple of months to catch our breath.  The last 45 years together have flown by and we have been blessed with 5 wonderful children, with the Grandchild count, now at 4.  They have been and will continue to be our major focus.  It is not so much that I want to retire, but rather, I don’t want to work 50 hours a week anymore.

            Fortunately, there are some opportunities for me that might take root.  While deciding that, Marilyn loves to play golf as much as I do, and that is a major blessing.  We will stay active in Church and Charitable Activities and perhaps do a little travel, but the one thing I will not miss are Planes, Trains and Automobiles, if you catch my drift.  I will miss the People, for they have made it all worthwhile, and to all whom I have encountered over the years, I am truly grateful.  And lastly but most importantly, I thank My Lord and Savior, Jesus Christ, for looking after My Family and I.  We would have been lost without Him.

Thank you very much for your thoughts and insights John. You have provided great leadership to the auto glass repair and replacement (AGRR) industry and I’ve certainly valued both our business and personal relationship. You will be missed by our industry. I’m sure everyone wishes you the best in your retirement and/or the new opportunities that await you.

I was honored at Auto Glass Week™ 2014 to present John with an inaugural AGRR industry award. The award begins a new tradition through which the industry honors an individual for the body of their contributions through the years. The award was once known as the Len Stolk Award (as you will remember Len was an individual focused on the advancement and education of all facets of the AGRR industry). John was an excellent choice to receive this inaugural award.

John and David resized

Photo courtesy of http://www.glassbytes.com

Just sayin’.

 

 

Below is the original interview that was done with John King on September 9, 2011

 

Welcome John King, Vice President – Aftermarket at Sika Corporation. Sika celebrated its 100 year anniversary in 2010, a true testament to the quality of their products and dedication to their customers. Sika has developed product systems in the automotive, construction, and industrial markets with a continuing focus on safety and sustainability.  In the AGRR world, Sika produces adhesives for sealing and bonding windshields in the aftermarket auto glass industry that meet and/or exceed OEM (original equipment manufacturer) requirements.

What changes have you seen in the auto glass world since you first joined Sika and began working in this industry?

            John King:  My first exposure to an Auto Glass Installation, was in 1997, in Zurich Switzerland, where I saw the Technician wearing a shirt and tie, and a smock.  This was how this tech dressed every day.  To him, his job was his profession.  While I certainly do not think that USA Installers need a dress code, I do see that many glass shop companies want to “raise the bar” of customer perception, installer performance and the glass shops’ commitment to safety, within our industry.  I firmly believe that this country has many technicians who are committed to this cause, and take pride in their work.  Unfortunately, over time, I have seen far too many technicians that care little about quality work, and even less about safety.  We have an Industry with an extremely low “barrier of entry”, meaning that anyone can put a phone number on the side of their truck and advertise auto glass repair and/or replacement.  However, that does not mean that they know what they are doing, and both the Public and Insurance Industry, know little about how to discern the difference between those who care and those who do not.  As our country’s economic conditions have worsened, our industry has become a haven for persons looking to find some type of income.  While it does not mean that those techs necessarily perform improper installations and repairs, we have to ask ourselves, have these new industry participants been trained?  How are they kept abreast of the ever changing details of vehicle glass replacement?  How many of them even care to know anything about “doing it right”?

What changes would you like to see in the future?

            John King:  Some States have talked about “Licensing” of auto glass technicians.  While I do not want glass shops to have to spend any more money then necessary, we have to ask ourselves, “How can we raise the barrier-of-entry into this industry?”    Licensing may be one avenue of doing this, while at the same time, providing a means of “raising the bar of safety” within AGR.  In any industry where the safety of the public is at stake, there are usually steps that those industry participants must take to first, truly understand what their work is to accomplish, and then secondly, prove they are worthy of doing the work.  In essence, become Industry Certified.  In AGR, the goal should be to provide correct and safe auto glass installations, meaning the vehicle’s passengers should not be placed at risk after their vehicle is returned to them.  Today, responsible Glass Shop Companies take this task upon themselves.  They see to it that any new technician receives adequate training, and spends time observing experienced and qualified technicians, before turning the new techs loose, to do jobs on their own.  The question to all of us should be, “How does the Public and or the Insurance Industry know that adequate training has taken place?”  In today’s AGR market, Glass Shop Companies spend their CSR’s time or their Outside Sales Rep’s time trying to convince prospective customers that “their installations are safer than their competitors”.   Unfortunately, there are many Glass Replacement Companies that are either ignorant of a truly safe and quality installation, or they are outright lying.  Licensing, which would include testing and certification, may be one of the ways to accomplish industry wide compliance of correct installation standards.

How long have you worked at Sika, and what do you find most rewarding about your job?

            John King:  January 1997 is when my career at Sika began, and I must admit it took me a while to have an understanding of how this industry works.  However, without a doubt, the most rewarding part of the business is getting to know people.  There are always business issues, business problems to solve, and strategies to implement, but at the heartbeat of this industry, is its’ people.  For me, there is nothing I like to hear more, than an unsolicited positive comment about how our Sika people are perceived by customers.  Whether Distributors or End Users, if our salespeople, or our customer service department are liked and appreciated by customers, that means that more than half the battle is already won.  The bottom line, is that most people, want to do business with good people. Therefore, if we can hire honest people with good interpersonal skills, and then adequately train them, and provide our customers with quality products, in the end, our sales people will provide excellent service and support to those customers, which would be ultimately rewarded with an ongoing business relationship.

Sika recently created a great animated cartoon called, “No Shortcut to Safety.” It’s a wonderful tool for glass installers and consumer alike, and describes the process of safe windshield installation without using laymen’s terms that can sometimes feel unfamiliar to people who don’t speak AGRR garble.

John, why did Sika Corporation feel it was important to develop this animation video?

John King: The AGR Industry is a cross section of groups.  We have the makers of product, the distributors of products, and the users of products, and those who need those products and services, who are collectively the Consumers, or Fleet Customers, or Insurers.  Communicating to a wide array of groups, with a single message, is always a challenge.  Our message needed to be part technical, part educational, part logical and if possible, part entertaining.   Most groups can understand all 4 parts of the message, if the message is short, and studies indicate, even with very intelligent persons, that 4 minutes is tops, to maintain someone’s attention.  We investigated a number of ways to develop and communicate our No Shortcut to Safety message, and when we came across the animated concept, it made sense to use the video’s simplicity.  We also found from experts in video communication that presenting a new message with an entertaining format, also maximizes the listeners retention of the subject matter; hence a cartoon format. 

What were your goals and target audience for this important message, “No Shortcut to Safety?”

John King: The message was still the key objective, and a message of a Safe and Reliable auto glass installation needed to be created and delivered to the Shop Owner, the Technician, and their Customers.  .

How would you like to see this video utilized? In other words, what do you feel is the most effective way to reach out to drivers to educate them about safe windshield installations?

            John King: Ideally, it is a combination of utilization of the video.  First of all, we know safety is important to most consumers.  This video has been shown in glass shop waiting areas to hundreds and hundreds of vehicle owners, and feedback from them has been exactly what we desired.  They have told those glass shops that they understand what they are doing for them.  Nothing has been more rewarding than reaching the Public with this message of No Shortcut to Safety.  Currently, glass shop waiting rooms are still the most common place where the message is shown.  However, with smart phones and the internet, we would hope to experiment with some glass shops being able to forward this video, to their customer, once they have scheduled a job.  The video then acts as an explanation to that customer as to what they should expect, when the job gets done.  This approach could then create a real value added marketing piece for shops to make the whole glass replacement experience, an even better one for their customers.

Thank you for joining us John.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Leave a comment

Just Sayin’ Blog – Disruption Innovation in Business

 

Clayton Christensen developed his disruption innovation theory studying the computer industry. Disruption in virtually any industry will determine winners and losers in business. If you visit the Christensen Institute web site you’ll read that:

“The theory explains the phenomenon by which an innovation transforms an existing market or sector by introducing simplicity, convenience, accessibility, and affordability where complication and high cost are the status quo. Initially, a disruptive innovation is formed in a niche market that may appear unattractive or inconsequential to industry incumbents, but eventually the new product or idea completely redefines the industry.”[1]

Image

Courtesy of TomFishburne.com

At the annual Code Conference held at the Terranea Resort, located in Rancho Palos Verdes, California that brings together some of the world’s geekiest folks; Google’s Sergey Brin debuted Google’s driver-less car (link). These cars were designed without a dashboard, steering wheel or a brake pedal. Why? A driverless car doesn’t need any of those accessories in the cars of the future as seen by the visionaries at Google. Could this be an example of “disruptive innovation” that could affect multiple industries?

This Google designed driver-less vehicle is very different from the self-driving vehicles that Google equipped with the driver-less technology installed on the Toyota or Lexus models that Google first began using. The initial self-driving cars Google used were off –the-lot models made by original equipment manufacturers so each came equipped with a dashboard with all of the typical accessories you’d expect to find both on and under the dash. But this new Google car comes without many of the accessories deemed required, up until now, and Google added a few other things that you will find disruptive long-term. It evidently is equipped with a flexible plastic windshield.

The car can only top out at 25 miles per hour and you’re not going to be seeing it on the highways anytime soon, but nonetheless with Google behind it one can only assume that the company’s long-term goal is to dramatically change driving habits. Will this technology be successful in disrupting the car industry? It would take time and a lot of treasure, both human and monetary. Google certainly has the wherewithal to attract the best and brightest to make this project a reality and money isn’t an issue.

Experts believe a self-driving car will make driving safer. Imagine that you can text or talk on your phone to your heart’s content as you won’t need to be concerned about distractions. Human driving errors should be greatly reduced if all the other cars around you are interconnected resulting in greater safety. Older drivers would have more freedom which would be good for them and great for everyone else concerned about grandma and granddad getting behind the wheel. Disabled drivers would also gain new freedom to rely on themselves versus others. An EY Automotive study says that autos with Autonomous Vehicle Technology will surge from 4% in 2025 to 75% by 2035.

There are going to be winners and losers as self-driving cars gain traction in the coming years. What will greater safety and independence for everyone mean to the insurance industry and all of those in claims departments today if the number of accidents drops? To the collision and automotive parts repair industry? To the rental car industry? To the auto glass repair and replacement (AGRR) industry? To the trucking industry? Countless industries will be affected. There’s going to be a lot of businesses that will rise and fall with this disruptive innovation and a lot of people at risk of losing their current job in an industry affected by the self-driving car.

There will probably be a day when those who want to drive their own cars could be viewed similarly as today’s drunk driver or someone that is texting as they are putting self-driving car riders at risk.

What will the likely outcome be if Google’s self-driving cars become a “disruptive innovation” and disrupt car manufacturers, the transportation industry as a whole and change the habits of the driving public in the years to come? We’ll have to wait to see.

So is there something a company or companies are doing today (or will be doing) in the AGRR industry that is (or will) disrupt the way things operate? Are there innovations that will “completely redefine(s) the AGRR industry”? I think the answer is yes to both questions. There are plenty attempting to disrupt what it is you are doing today and I know that there are those trying to disrupt the future of the industry with new innovations.

Here is another definition of disruption innovation:

“A disruptive innovation[2] is an innovation that helps create a new market and value network, and eventually disrupts an existing market and value network (over a few years or decades), displacing an earlier technology. The term is used in business and technology literature to describe innovations that improve a product or service in ways that the market does not expect, typically first by designing for a different set of consumers in a new market and later by lowering prices in the existing market.”

You probably think we already have enough disrupters in the AGRR industry, but what is your plan going to be if you’re not one of the one’s who has designed or is designing a “disruption innovation” in the industry? Something is certainly coming.

Just sayin’.

 

 

 

[1] http://www.christenseninstitute.org/key-concepts/disruptive-innovation-2/

[2] http://en.wikipedia.org/wiki/Disruptive_innovation

 

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

2 Comments

Just Sayin’ Blog – Is it Time for Licensing?

I read an article relating to the Novus Super Session at the organization’s Annual Franchise Conference held last week in Tucson. A representative from one of the networks that operate in the automotive glass repair and replacement (AGRR) industry in the United States attended the conference and discussed industry related issues and ideas. One of the issues discussed related to the responses to survey questions that the network had asked of some number of in-network shops that either are:

    1. required to bill through the network for the insurance or fleet work that these shops do for an insurance company that utilizes this network as an administrator or
    2. shops that are asked by the network to do work on the behalf of the network for an insurance company or fleet account that the network either can’t or doesn’t want their own company owned technicians to do for some reason.

The survey question that the representative said received the most comments related to unlicensed and/or unregistered AGRR shops. The network representative reported that when the survey responders were asked if they would support the regulation of auto glass shops in their states a resounding 74.2% responded with a yes. I think the question relating to regulation of auto glass shops an interesting one and I support the regulation of auto glass shops that do replacements.

When you consider all of the various “services” that are regulated by states, it is inconceivable to me that auto glass replacements (and other automotive repairers) are not. I looked on the web site of the Illinois Department of Financial & Professional Regulation (IDFPR) that oversees and licenses those considered “professionals” by the State of Illinois. There are 237 professions that are regulated by the IDFPR starting first with those who provide “Acupuncture” services. That seems like a profession that should be regulated. If you’re going to have someone perform acupuncture on you, would you want just anyone off the street be allowed to stick needles in you? Probably not. The listing ends with “Veterinary Technician”. The professional listings include some in the medical profession, but not every specialty is listed so if you add every regulated and/or licensed professional’s in the medical field to the list on the web site would be much longer. How does the state you live regulate those they consider professionals? Do you have 237 different professions regulated and/or licensed by your state?

I think it’s interesting that some of the professions that are regulated and/or licensed by the State of Illinois include:

Real Estate Appraiser                                             Athlete Agent

Cemetery Customer Service Employee                    Community Association Manager

Detection of Deception Trainee                                Nail Technician

Shorthand Reporter                                                Timeshare Resale Agent

Understanding that a few of the professions on the truncated list above taken from the IDFPR web site could, for instance, certainly cost you money if you had a bad appraisal via a Real Estate Appraiser, but in all likelihood none of these licensed and/or regulated professions are going to put your life at risk. A faulty windshield installation, on the other hand, could cost you and/or passengers riding in your vehicle serious injury or in a worst case scenario a life.

If you visit the AutoGlassSafetyCouncil.com or SafeWindshields.com site you’ll find a variety of information regarding the importance of windshields in auto glass safety. A question on the SafeWindshield.com site asks:

What role does my windshield play to ensure my safety in an accident?

The windshield provides a significant amount of strength to the structural support in the cabin of the vehicle. For instance, in a front end collision the windshield provides up to 45% of the structural integrity of the cabin of the vehicle and in a rollover, up to 60%.

There should be no dispute regarding the importance of a windshield in ensuring the safety of auto and truck passengers, asking that those who install your windshield to be licensed and/or regulated doesn’t seem unreasonable to me? If in the State of Illinois the state government feels that there is sufficient need to regulate and/or license Nail Technicians, Athletic Agents or Shorthand Reporters, wouldn’t you think that the same state legislature would take a look at various automotive repairs that if not done properly, could cost someone a serious injury or death?

The network representative at the Novus meeting was quoted as saying that for those that the network surveyed:

“By far, the largest problem was unlicensed/unregistered shops.”

You can certainly downplay the network that provided the survey results when asking the question “What was the largest problem in the AGRR industry?” (some might suggest the right answer to the question is the network providing the information is actually the largest problem in the AGRR industry), but is it time to consider the licensing and regulation of the AGRR industry considering the importance of the windshield to occupant safety? Perhaps that licensing or regulation could include adherence and verification of replacements to the Auto Glass Replacement Safety Standard®. That might be an unpopular position for some, but would it be so bad? As auto glass professionals what are we afraid of?

Just sayin’.

 

AGW 2014 Free Admission

Link to Free Admission Ticket to Auto Glass Week 2014

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

5 Comments

Just Sayin’ Blog – Now and in the Future

Last Tuesday, February 4, 2014 there were two items in glassBYTEs.com™ e-Newsletter that I read with great interest. The two articles got me to wondering about how technology could be developed to increase passenger safety in the auto glass replacement (AGR) industry by alerting passengers of potential problems.

The first article I enjoyed reading was the “View From The Trenches” blog post by Neil Duffy. His blog post titled “Nightmare on Stevens Creek” pointed out those in the auto glass repair and replacement (AGRR) industry who are portrayed as “hacks” in the article; those who lower the quality of installations and how our industry is viewed. Many of these “hacks” don’t follow or worse are even aware (an even scarier nightmare) of the Auto Glass Replacement Safety Standard® and what is required, on their part, to ensure that those they install auto glass for are safe in an accident. The second article was an Associated Press article that appeared on TribLive.com titled “Feds want cars to be able to talk to each other“. Seems like a great way for the cars we drive not to run into cars that others drive. This technology will have to be in full use when we move to driverless cars, but in the meantime it could greatly reduce collisions today if rolled out in new cars.

jetson

Everyone in the auto glass repair and replacement (AGRR) industry across the country has seen someone who isn’t following proper installation standards and put drivers at risk when auto glass is replaced. There are those in the industry who think the drums are beat too loud about this topic, but it is an issue and Neil rightly points to the concern that he sees with the acts of some lowering the standards which could bring us all down at some point in the future. As Neil wrote,

“This drains the resources and profitability of shops who value quality. By allowing hacks to contaminate our industry we are putting both the public at risk and our own livelihoods. The sad fact is that there is an unwillingness to seek regulatory constraints or to somehow cull the worst offenders in the AGRR industry. Why would a glass manufacturer or wholesaler try to cut the number of sales they could make by calling for the removal of incompetent or illegal customers? Why would a third-party administrator (TPA) demand stringent certification and high-limit liability insurance over negotiating deeper discounts from the same vendors? Furthermore, we, in AGR, play into the hands of our largest competitor who promotes its technician’s training and employee character via the media over smaller companies – the local unknown local glass purveyors – that may prey upon potential clients. That alone can create a bad dream or two.”

Are there auto glass suppliers or urethane suppliers that would walk away from a sale if the supplier is aware of bad behavior on the part of a customer? I for one would like to believe that there are. But would some suppliers step in and provide the products versus losing a sale? Sadly probably yes.

I appreciate Neil Duffy pointing out that there are those in the industry who shouldn’t be installing auto glass in any vehicle because they either don’t know how to properly do a replacement or they don’t care that they are installing a part in an unsafe manner. Bad apples that exist in our industry can lower the value that the vast majority of us in the industry who are doing it right receive as Neil suggests. Consumers believe they are getting a quality product regardless of what company they use. When a company that is doing everything right competes against those who don’t, how could a consumer know that they could be choosing a company that delivers the service and/or products in an unsafe manner which could ultimately cause serious safety issues? They don’t.

The second article that I referenced that appeared on the glassBYTEs.com™ web site on February 4th dealt with the United States government push to require automakers to equip vehicles with technology that will reduce accidents by having vehicles “talk with each other”.

The Associated Press article details the work that the National Highway Traffic Safety Administration (NHTSA) has been doing in cooperation with automobile and truck manufacturers since the early 2000’s to prevent accidents via new technology.

The article quotes David Friedman, the head of the safety administration saying that NHTSA “estimates vehicle-to-vehicle communications could prevent up to 80 percent of accidents that don’t involve drunken drivers or mechanical failure”. Imagine the lives that will be saved with the implementation of new technology. Mr. Friedman goes on to say the goal is “to prevent crashes in the first place”. Historically the government’s focus has been on passengers surviving accidents. On the NHTSA web site the department’s mission reads:

“NHTSA was established by the Highway Safety Act of 1970 and is dedicated to achieving the highest standards of excellence in motor vehicle and highway safety. It works daily to help prevent crashes and their attendant costs, both human and financial.”

The technology that is being developed and installed on vehicles today across the globe is pretty amazing and has been a dream going back over 50 years.

In 1956 General Motors showcased their cars with a traveling show featuring the company’s fleet at events in major cities across the country. The first “Motorama Show” was held at the Waldorf-Astoria in New York City. This “Key to the Future” video was a “featured film at the exhibit that looked into the far distant future of 1976 which predicted a jet age future with electronic digital displays and an On Star like central command that would guide us along our uncrowded path to adventures.”   

The view of the cars of the future from 1956 obviously wasn’t reality in 1976, but we will be seeing more and more technology installed in all types of vehicles. This CarScoops.com article talks about an “Augmented Reality System (that) Allows Drivers to See Through Large Vehicles”. The ‘See-Through’ developed by a team from the University of Porto, in Portugal, is directed by Professor Michel Ferreira. The technology is a great advancement in driving safety and will undoubtedly save life’s’. Imagine being able to “see-through” a large vehicle such as a bus in front of you in order to safely pass on a two lane highway.

Virtually every car on the road today has on-board technology that informs drivers of mechanical issues that have been detected.  Additionally, mobile telephone hands free devices and Global Positioning Systems (GPS) technologies are available for most vehicles further helping to improve driver safety. Government authorities, driving safety advocates and organizations in cooperation with automobile manufacturers continue to build on technology that improves passenger safety. The ever changing availability of new safety technologies being developed for vehicles is rapidly changing how we interact with vehicles, how the vehicles we drive interact with us and even how the vehicle interacts with everything near the vehicle. A Bloomberg.com article titled “Talking-Car Systems to Be Required as U.S. Weighs Rules” briefly discussed future technologies being developed by CISCO Systems and others for connected cars, along with companies such as Google and Telsa Motors working to employ that technology in driverless vehicles.

So, after reading both of the articles that appeared on the same glassBYTEs.com™ e-Newsletter I began wondering if future technology could be developed to let auto and truck drivers know if the auto glass in the car they are driving or are passengers has been properly replaced. Perhaps a farfetched idea you’d say, but since we all know that a windshield that is being replaced has to be properly installed to ensure that the passenger side air bag deploys correctly to protect occupants and to also maintain structural integrity of the roof; maybe not. As I’ve heard a number of people say over the years, “It’s going to take some politician’s family member or someone important to be killed for something to be done to ensure the safe installation of auto glass.” Certainly no one wants that to happen. As Neil so aptly wrote:

“This writer is truly tired of having nightmares that “Freddy the hack” is becoming the ugly face of today’s automotive glass industry. I see it more and more each day and most worrisome is the complete lack of concern by many within our industry. How can we police ourselves or be policed is the $ 64,000 question that has to be addressed and answered some day, hopefully sooner rather than later. If we continue to bury our collective heads in the sand, it will be our own necks that get hacked, as well as more unfortunate windshields.”

I know of countless AGRR professionals who strive to ensure that auto glass is installed properly and spare no expense to do so. But without either the industry as a whole taking a more active interest or governmental authorities taking a regulatory role in the AGRR industry maybe someone can develop a technology to alerts drivers and passengers alike that the car they are riding in is indeed safe to drive, or not.

Just sayin’.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

2 Comments

Just Sayin’ Blog – A Matter of Fairness

Recently I was forwarded a letter that Safelite Solutions (“Safelite” “SGC Network”) sent to an auto glass repair and replacement (AGRR) company.  The letter related to work that the company had done for a consumer that happened to be insured with a company for which Safelite manages glass losses. The AGRR company had done a replacement and was required to send the bill for the work that was done for the consumer through Safelite in order to receive payment. The letter that was received started out stating:

“The SGC Network is currently in the process of performing a random fast cure kit Audit.”

The letter went on to state:

“Please fax copies of the work orders/invoices that include the urethane lot stickers. Do not send proof of purchase or receipts. The only acceptable documentation is the urethane lot sticker attached to the invoice or work order. Please forward to ATTN: SGCNetwork at 614-210-9941 within the next three business days.”

Have you seen or received one of these letters? I hadn’t seen one before. What was requested certainly seemed reasonable to me and the company also thought the request was reasonable. The company had the information readily available since the information is required under various sections of the Auto Glass Replacement Safety Standard that is administered by the Auto Glass Safety Council™. What was interesting about the request was that Safelite was taking on the role as an independent 3rd party auditor in asking for the information. Who do you think performs that function when and if Safelite audits its own use of a “fast cure kit”?

Take a minute and look up the word “fairness” on dictionary.com and you’ll find the following:

Noun

“the state, condition, or quality of being fairor free from bias or injustice; 

evenhandedness”

            Adjective

“free from discrimination, dishonesty, etc; just; impartial”

            Adverb

“in a fair way; correctly: act fair, now!”

It’s also interesting to see the word fairness shown via TH!NIKMAP’s Visual Thesaurus®.

 Fairness 2

 

So does it smack of “fairness” that a retail auto glass company that competes for auto glass repairs and replacements in the United States is also given responsibility for performing audits of competing AGRR companies to determine if they are using a “fast cure kit”? It doesn’t seem that Safelite would be the appropriate entity to audit others if you applied the definitions of fairness:

“the state, condition, or quality of being fairor free from bias or 

injustice; evenhandedness”

“free from discrimination, dishonesty, etc; just; impartial”

“in a fair way; correctly: act fair, now!”

They certainly aren’t “free from bias” and it doesn’t seem as though they would have a strong desire to adhere to the idea of “evenhandedness”. I don’t see how they could be “impartial”. And it would seem impossible that the act of their being the auditor would be accomplished “in a fair way”.

To me it seems to defy logic when the corporate mission of any company must be to grow market share and produce increased value to its shareholders for it to be possible for them to be an independent auditor of others in the industry in which they compete.

Safelite’s company web site states:

We must do what’s right, even when no one’s watching

This means living by our values and being accountable. It is about how we treat our staff, our customers and members of our local community. We reinforce this throughout our corporate structure with legal compliances and ethics training, an employee ethics hotline and numerous channels for feedback and concerns.”

Certainly words any company would be proud to adhere. It seem appropriate to ask “who’s watching” those that are watching us? Do you think that there’s a 3rd party auditor that’s auditing the auditor?

I think you can ask the same question relating to the “pre-inspections of auto glass claims” that was discussed in a glassBYTEs article titled Safelite Solutions Accepts Recognition for Pre-Inspection of Auto Glass Claims” in May of last year. Does that practice seem to smack of “fairness” to you?

As most everyone on the planet knows, Super Bowl XLVIII is coming this Sunday, February 2, 2014 between the Denver Broncos and the Seattle Seahawks. The officiating crew this year is led by veteran referee Terry McAulay. What if for the game this year a crew of Denver Bronco fans is allowed to officiate the game instead of the impartial officials that have been selected by the NFL? If that was allowed to happen how many calls do you think would go Denver’s way? Even the most ardent Bronco fan hoping for a win for their team would see that as both blatantly “unfair” and “unjust” to the Seattle Seahawks team.

So as “A Matter of Fairness”, who thinks that how Safelite operates as an auditor and/or inspector is:

“the state, condition, or quality of being fairor free from bias or 

injustice; evenhandedness”

“free from discrimination, dishonesty, etc; just; impartial”

“in a fair way; correctly: act fair, now!”

Just sayin’.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

2 Comments

Just Sayin’ Blog – Wind at Our Backs?

As we near the end of the first three quarters of 2013, it appears that we may have some wind at our back. There has been some slight improvement in a couple of the key drivers of the automotive glass repair and replacement (AGRR) industry. The key drivers of the AGRR industry are weather, the economy and miles driven.

 

The Old Farmer’s Almanac has been published since 1792 and is “North America’s most popular reference guide and oldest continuously published periodical”. Forecasting the weather is a specialty of the Almanac and the publication touts an 80% success rate at correctly forecasting winter weather. The Almanac recently published the weather maps for 2013 – 2014. The Almanac is forecasting the following weather for regions they report for this coming winter:

  • The Northeast a winter milder in the North and colder in the South with slightly above average snow in the region;
  • In the Atlantic Corridor a colder winter with snowfall above normal;
  • The Appalachians will see a colder winter with snowfall near normal;
  • The Southeastern United States will see colder weather and above normal snowfall;
  • In the Lower Lakes temperatures will be slightly milder with below normal snowfall;
  • In the Ohio Valley area winter will be colder, along with below normal snowfalls;
  • The Upper Mid-West will be a mixed bag with a warmer winter in the eastern part and below normal in the western part of the area. Snowfall will be above normal;
  • The Heartland will be colder than normal this winter and snowfall near normal;
  • The rest of the country is expected to be colder than normal with average to above average snowfall;

All-in-all a mixed bag with the weather and I hope that wherever your business is located you’re benefited by a colder and snowier winter.

The economy is also a bit of a mixed bag. Positive news came from new car sales which can be an important factor in an improving AGRR industry. J.D. Powers detailed year-on-year improvement in new-vehicle sales in the United States by reporting in their August 2013: Monthly Automotive Sales Forecast that “August new-vehicle sales reached the highest level in seven years.” The report went on to state, “New-vehicle retail sales in August 2013 are projected to come in at 1,270,400 units, 12 percent increase from 2012”. That’s great news for the AGRR industry. J.D. Powers is predicting growing new-vehicle sales for the remainder of 2013 and well into 2014. Really great news for the AGRR industry!

CNNMoney reported this past week in an article titled, “Jobless claims fall to 7-year low, but…” the rate of unemployment showed signs of dropping which is great news, but is tempered with the suggestion that it’s a result of people continuing to drop out of the work force. There are “11.3 million Americans who remain unemployed” the article reported with “three unemployed people for every job opening”. As with the weather, unemployment figures vary by region so its how your local economy is doing is what could affect how good your business will be in the next year.

The price of oil and how oil prices effect gasoline prices is another key part of the equation for the AGRR industry. As reported by the United States Energy Information Administration in the “Gasoline and Diesel Fuel Update”, prices year-on-year through September 9, 2013 on regular gasoline show that prices are down $ 0.26. Lower gasoline prices are great for both the consumers we rely on for business and for all of those company vehicles providing mobile service. Hopefully the price of gasoline will stay low.

You can look at reports from the U.S. Department of Transportation – Federal Highway Administration (FHA) as positive or negative depending where you reside. The FHA showed in its June 2013 Travel Monitoring and Traffic Volume Report that year-on-year miles driven were relatively unchanged with a slight decline of 0.1% from June 2012. The news that miles driven is not showing growth wasn’t great news for the AGRR industry that thrives on vehicles out driving on roads, but staying level was better news than a drop.

So how are these three key drivers affecting your business and do you think the wind is at your back? Regardless of whether the wind is at your back or not, I think there is a fourth key driver to your business and it is the most important one for finding success in your business. That key driver is you. So how are you going to take advantage of the marketplace you compete? What is it you’re doing to make your business stand out among all those with whom you compete?

I’ve written in previous blogs “The Times They Are (Always) A-Changing” and “The Times They Are (Always) A-Changing – Part II” about the opportunities in the marketplace for AGRR companies. I strongly believe that there are opportunities for independents in our industry, but you’ve got to surround yourself with the best people and make sure that they are all committed to the goals and aspirations that you have for your business. If you haven’t got that you’re going to be struggling.

What else are you doing to separate yourself from your competitors? Look for ways to be successful and be relevant in your market so that you stand out. There is a recipe for success in your market and you’ve got to figure out what it’s going to take to make sure you find and keep being successful. It starts with you as you’re the key driver of your business.

If the three key drivers are beginning to turn to your favor and with the possibility of the wind at our backs, what is it you’re going to do in the next year to see that you not only survive, but thrive in the AGRR industry? It’s really up to you.

Just sayin’.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

3 Comments

Just Sayin’ Blog – A “Reasonable” Path to Follow

In 2012 elected representatives in two states, South Carolina and Massachusetts, introduced legislative initiatives related to the auto glass repair and replacement (AGRR) industry. In both states the initiatives ultimately turned into bills that were passed and signed by the respective state’s governor. The legislative process is often referred to as “sausage making” (attributed to American poet John Godfrey Saxe), taking ideas of a diverse group of interested parties (in this case both large and small AGRR retail companies, manufacturers and distributors, networks or remarketers, third-party administrators, insurance companies and others) who attempt to influence legislation in hopes of making the sausage to their own individual taste. Legislators, with the help of all the interested parties and of course the lobbyists employed to help influence the outcome for their clients, attempt to find common ground so that when possible all of the interested parties see something of what they originally wanted in the bill that is ultimately passed but probably not everything each was hoping to achieve. There is of course always next year…

In the blog I posted on June 12, 2012 titled Auto Glass Repair & Replacement Industry Legislation in South Carolina ***UPDATED*** , I wrote about the law that was passed and signed by the governor in South Carolina earlier this year and what it meant to those who compete in all facets of the AGRR industry in that state. The South Carolina law takes effect on January 1, 2013. In this blog post I’d like to take a look at the bill that was passed and signed into law by Massachusetts Governor Devel Patrick and what its guidelines mean to those that it is truly meant to protect – consumers in the State of Massachusetts. I believe that this law is one that should be a template for use in other states that want to pass AGRR legislation in the coming year.

Massachusetts Bill 2216 took full effect on November 1, 2012 and the law’s primary focus is on what it should be – consumers. When you review the requirements of the law, it states that businesses that provide AGRR services in the state are required to follow a number of guidelines in order to be licensed which ultimately will provide a variety of protections to consumers. Licensed? That seems “reasonable” doesn’t it? With the importance of a safe installation of the windshield to vehicle owners in the state it seems like a “reasonable” expectation that residents of the state should feel confident that the Massachusetts Division of Standards is watching out for them and their passenger’s safety.

What are some of those protections? The first is that any company or individuals doing replacements for Massachusetts residents register with the state and maintain an address in the state. Any new company or a company that is seeking renewal of its license for a shop or shops must have a physical location or locations and that the company maintain indoor facilities to perform repairs to vehicles. Again that appears to be a “reasonable” expectation on the part of consumers.

If you’re going to operate in Massachusetts a company must register its vans as commercial vehicles and obtain all licenses and permits that are required by the various governments (local, state or federal). Again that seems like a “reasonable” expectation of a consumer in the state.

There is a requirement in the law that a “registered motor vehicle glass repair shop shall maintain records for each motor vehicle upon which motor vehicle glass repair services have been performed”.  That the registered motor vehicle glass shop has to maintain records to “show(ing) the usage of all glass parts, major accessory parts, including moldings and major hardware and component parts”. Remembering that the law is really all about protecting Massachusetts residents, the bill goes on to address the requirement that the registered shop maintain records about “the brand, product number or name and lot and batch numbers for the adhesive system product used” (language that relates to the Auto Glass Replacement Safety Standard – AGRSS™) and again is a “reasonable” protection of the consumer in case of a failure or recall of the glass part or adhesive product used. The law requires that the registered shop maintain records for “18 months or for so long as a warranty  on the motor vehicle glass repair service is performed is in effect, whichever is longer.” This is another guideline in the law that is now in effect that seems like a “reasonable” expectation of a consumer in case they experience an issue relating to the AGRR service provided in the future.

The law also requires that the consumer must be provided, upon their request that a “registered motor vehicle glass repair shop shall disclose all information relating to the charges for the repair or replacement services, including the amount of the charges, the identification and line item charges for the parts provided and verification of the parts used, regardless of whether the amount is paid by the consumer or billed to the consumer’s insurance company.” That seems “reasonable”. If a Massachusetts consumer has a glass repaired or replaced, shouldn’t they expect that the price that is being invoiced by the company that is actually doing the repair or replacement is the price that is actually being charged to their insurance company when a claim is filed against the consumer’s insurance policy? Yes that does seem “reasonable”. I’m not sure how a network or remarketer who is used to receiving a “spread” on the work being done by others on its behalf in Massachusetts deals with that new guideline, but it is now the law.

There are also requirements relating to the actions that are allowed to take place by third party administers, networkers or remarketers and insurance companies that operate in the state. The law also includes a section relating to guidelines that outlaws anti-steering by any of the aforementioned to ensure that consumers can use a shop of their choice. No third party administer, network, remarketer or insurance company can require that a Massachusetts insured use a particular AGRR glass shop. That also seems “reasonable” expectation doesn’t it? A law that is providing the consumer the opportunity to choose the shop they want to use via this legislation is a good thing.

The law authorizes the Massachusetts Division of Insurance to not only enforce all of the guidelines, but authorized the authorities to collect fines associated with any violation of the law by those providing AGRR services to Massachusetts residents. The law requires consumer transparency and that too is a “reasonable” expectation that consumers should expect to receive when they are in need of auto glass repairs or replacements.

I believe that Massachusetts Bill 2216 which has was enacted by the state legislature and signed by the governor into law could be a template for similar legislative initiatives in other states in the coming year. In a previous blog titled Network Participation Agreement – “Special Update” I suggested that as an AGRR retailer you might want to,

continue to focus on the customer and provide exceptional value with outstanding transparency.” 

It seems to me that the Massachusetts law provides transparency and new protections to residents of the Bay State who may require the services that AGRR industry provides to them and those protections are indeed “reasonable”. The guidelines in the law and the protections it provides must be abided by AGRR retailers in the state, third party administrators, networks, remarketers and insurance companies or there are consequences to any who may attempt to circumvent the law. The guidelines provide protections for residents/consumers that are “reasonable” for all to follow and are in the best interest of residents/consumers. The Massachusetts law is, I believe, a great place for other states who are interested in protecting its residents to start. What do you think?

Just sayin’……………

+

, , , , , , , , , , , , , , , , , , , , , ,

Leave a comment

Just Sayin’ Blog – Hopes for the New Year (Fall Update)

We are now in the last quarter of the year; so how has 2012 been for you so far? In the first month of this year I posted a blog titled ‘Hopes for the New Year’ and then wrote a spring and summer update to that posting. When you take a look back over the past 9 months pretty much all the hopes for 2012 I had have fallen short.

The first hope was that:

“Our industry is affected by three key business drivers:  weather, the economy and miles driven. Sadly we have no control or influence over any of these so I’m hoping for some luck for 2012.”

The weather this year hasn’t been very cooperative for the automotive glass repair and replacement (AGRR) industry. We started with a snowless winter in most of the northern states and as reported by HailReporter.com we’ve experienced about 2/3 of the hail storms that we had in 2011. You know that snow, ice and hail all are big influencers to auto glass breakage and all were busts (pun intended) this year.

Early in the year many experts forecasted the economy would be anemic. Most of those forecasts were accurate. Kiplinger.com provides a variety of information on financial advice and business forecasts via its Economic Outlook section of the website which they regularly update with current outlooks. As of September 27, 2012 Kiplinger reported that:

“The stubbornly tepid economy will persist for the rest of this year and next.”

“It’s clear now that job creation will continue at a sluggish pace in the second half of 2012.”

“The U.S. is likely to add fewer jobs this year than last — about 1.6 million, compared with 1.8 million in 2011.”

“Instead of lending, banks remain wary.”

“Higher gasoline prices pushed inflation in August to an annualized rate of over 7%.”

“Business managers will remain very cautious about expansion at least into the early half of 2013.”

Expect the recent roller coaster in oil prices to keep on going a while longer.”

“Rising prices of fuel and other goods pose a risk to the increased growth rate, even as consumers shrug off anemic job growth and continue to spend.

Not very positive views from Kiplinger’s relating to another key influencer – the economy – to the AGRR industry.

Miles driven had been trending upward this year, but with rising gasoline prices the Department of Transportation’s Federal Highway Commission reports that as of July 2012 miles driven starting heading lower again. Earlier this year many forecasted that 2012 would not be a good year for gasoline prices and it appears that the forecasts were fairly accurate. This is the time of year when historically prices decline, but even though the price of oil has moderated; issues with a number of gasoline refineries across the country has caused prices to go higher as reported by a GasBuddy.com blog. The AGRR industry would like to see miles driven go back to the peak levels of seen in 2007 – 2008 for this key influencer.

The second hope was that someone becomes a market leader for the AGRR industry. I’m not holding my breath, but I’m still hoping for that one. My third hope was for fewer imported (non OEM) auto glass parts in 2012 so that prices might be able to stabilize. There may be fewer imports this year, but that’s only because the overall market size is down. The fourth hope was that every windshield be installed according to the Auto Glass Replacement Safety Standard – AGRSS®. It’s the right thing to do for your customers.

 

The fifth and final hope was that somebody would step up and compete against Safelite® at the both the retail and network level. It was a tall order considering the extremely envious dominant position that it enjoys with its strong retail and network. It’s not as though there aren’t individuals or companies at all levels of the AGRR industry with the unrelenting goal (and hope) of providing consumers with an alternative. At some point you have to believe that insurers and fleets might become wary of the tremendous influence the market leader has achieved with its dominant market position. It’s hard for me to see how Safelite® could maintain its market position or really grow its market share larger long-term. Unless they are willing to restart its acquisition program or maintain the onslaught of media advertising over the long-haul it’s going to be tough for Safelite® to move its sales upward in a meaningful way. Time is running out this year, but who knows what the New Year will bring.

 

Here’s hoping that in the last three months of 2012 you’re seeing positive signs pointing to improvement in your business or at the place that you’re working.

Just sayin’……….

 

 

Cartoon courtesy of Tom Fishburne

 

 

 

<1

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Leave a comment

Just Sayin’ Blog – Auto Glass Networks – Part 1

 

In my last blog I wrote about Safelite® Auto Glass and its SGC Network, which is one of the networks (or third party administrator -TPA) that operates in the auto glass repair and replacement (AGRR) industry in the United States. Safelite® released a new addendum to its Network Participation Agreement that outlines new guidelines or requirements  on AGRR companies that either participate in the SGC Network as sub-contractor’s that Safelite® uses to do repairs and replacements for Safelite® or those AGRR companies that are forced to invoice work they do for certain customers through the Safelite® SGC Network. A reader of that blog suggested that I write about networks in general, so here goes.

While Safelite® is the largest AGRR network it is by no means the only one. All AGRR networks share some similarities, but each is unique in how it operates. Since there is no single AGRR company that covers every square mile of the United States providing services solely through its own AGRR technicians to consumers, every network must attempt to aggregate the services of thousands of disparate AGRR service providers into a single “quasi-retail” service entity. Each of the networks attempt to replicate a full service AGRR company that looks like it is capable of servicing each and every consumer with a single price and service offering that suits the needs of every insurance or fleet company customer it has in its network. That’s where the problems begin.

The first problem a network has to manage is the reality that each of the AGRR companies that participate in its network are not under its control, so a network has to deal with inconsistency of service levels to its customers. That is an issue; a really BIG issue. Currently, a network attempts to counter inconsistencies by stipulating increasingly detailed and specific guidelines in its effort to create some semblance of uniformity amongst a very large, broad and diverse set of participants. How do the networks accomplish that? It takes a great deal of work to try to herd all those cats.  Some do it poorly while some are more accomplished at the task.

It’s quite the challenge though, and perhaps never so clearly indicated as by Safelite®’s recent addendum whereby it now seeks to go beyond standards of repair and replacement practices to actually regulate the business conduct of its participants. By venturing into this area it may seem as a case in point that the network may be leaning into “too big to fail” territory, as it tries to corral a wide range of participants into a single product offering. It is likely to be very difficult, if not impossible for a large network to monitor and enforce all of the stipulations on which it seeks agreement from its numerous participants.

It makes me wonder if the newest Safelite® addendum might actually be showing off some of the real challenges that at least one of the largest network entities is experiencing in trying to solve a problem and meet its entire customer needs.

As I mentioned, every AGRR network must attempt to cobble together its own group of AGRR service providers (participant) attempting to provide a service model that it hopes attracts its targeted customer(s).

That’s the networks strategy. Now how about your decisions as an independent AGRR retailer?  It’s probably best to make your own assessment of how network participation fits into your overall marketing and sales strategy. You may not be able to avoid networks altogether, as most insurance companies require that billing for the service provided be processed through a network. But remember, in all cases, it is the choice of every AGRR company to decide whether it will or won’t participate in the opportunity to receive repairs or replacements from every AGRR network. As an AGRR retailer, you may prefer to do work for one or more of the networks because the network provides value to you in exchange for the value you provide. Some AGRR retailers choose not to agree to the pricing or service requirements that a network has on participating. That again is the choice of the AGRR retailer. It’s probably not a good strategy if you’re relying on a network for your repairs and replacements, but if you do you should be consistently working on lowering your costs as you can be assured that the network will be looking for you to lower the value you receive for repairs or replacements.

Networks are an established part of the AGRR industry and they aren’t going to go away. Legislative initiatives may be attempted state by state to help regulate or moderate how networks operate, but networks do provide value to the customers that use them. Whether or not the networks that operate today will be in business five years from now will be determined by the value, service and quality that it provides to its customers. Only the strong will survive. More on how networks operate in a future blog posting.

Perhaps the best advice for today’s AGRR retailer is simpler than we all have been thinking: “focus intently on the customer, listen to what they need, and set about to do the right thing.” A very simple and straightforward concept.

Sam Walton is quoted as saying,.

 

“There is only one boss. The customer. And he can fire everybody in the company from the chairman on down, simply by spending his money somewhere else.”

Stay focused on your customer and provide value to them and you should do okay.

Just Sayin’….

 

 

 

 

 

 

 

56

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

3 Comments

Just Sayin’ Blog – A Lesson in Perseverance

(Autographed Pin Flag from Ernie Els last major win in 2002 at The Open Championship held in Scotland)

Perseverance is a key trait to achieving success in any undertaking. It doesn’t matter if it’s a personal one or one that you have in your business life. It doesn’t matter whether the undertaking is a big or small one. The ability to maintain an unrelenting focus on any goal that you are pursuing requires you to work through the difficulties and obstacles that confront you.

This past Sunday you saw that trait in the 2012 Champion Golfer of the Year – Ernie Els – by his winning The Open Championship that was played this past week at Royal Lytham & St Annes Golf Club in Lancanshire, England. The Open is the 3rd of the four majors (The Masters, The U.S. Open, The Open Championship, and The PGA Championship) which are held each year and where winning one of them defines a PGA Tour player’s career.

Sunday’s final round was a test for the 83 tour players who had made the cut after the end of the second round on Friday. Only Ernie and 8 other players were able to shoot under par on Sunday with Ernie carding a 2 under par. After 72 holes were played during The Open Championship this year only 18 golfers scored level par or better. Ernie was able to put pressure on Adam Scott who had started the final round in the lead at 11 under par and who led the tournament through 16 holes. Ernie made a crucial birdie putt on the final hole of his round that placed added pressure on Adam Scott who ended up bogeying the final 4 holes on Sunday and saw his goal of winning his first major championship slip away.

Ernie Els is a storied professional golfer who has certainly had great successes in his 22 year career, but at 42 years of age he hadn’t had a win on the Professional Golf Association (PGA) Tour since 2010 (the Arnold Palmer Invitational) and earlier this year he was questioning whether he would ever be able to find a way to win again, let alone win a coveted major. With all the success Ernie had achieved in his career he seemed to have lost many of the considerable natural talents, along with ones he had developed over years of practice that together made him a successful PGA Tour Pro. Over the past several years he changed a number of people he surrounded himself with who he felt could help him find the right mix of ingredients that would allow him the opportunity to win again. As he focused on 2012 he had a number of heartbreaking near misses at winning tournaments which would have allowed him to gain an invitation to The 2012 Masters Tournament, a tournament which he had played for 19 consecutive years. Having suffered that professional setback to his career Ernie continued to work on his game, despite many opining that his career was over or certainly had to degrade to a level where he would be unable to again regain the level of play he had achieved.

Ernie’s ability to utilize all of his talents to emerge as The Open Champion this year is a testament to his perseverance. After winning he thanked his wife Leizl, along with his daughter Samantha and his son Ben for all the support they give him. Ernie also thanked a number of others who stood by him as he worked his way through the many issues that he faced in his journey to again win. And winning a major; a feat he felt he may have never achieve again, but did with hard work, dedication and perseverance.

If you operate a business in the retail or wholesale automotive glass repair and replacement (AGRR) industry; or if your business sells products to those in the industry, 2012 has probably been a year full of difficulties and obstacles requiring you to show perseverance. As I mentioned in a recent blog titled “Hopes for the New Year (Summer Update)”, the key drivers – the weather, the economy and miles driven – have not been trending positively this year and have been affecting many (6 out of every 7 of you in a recent survey question I asked) in the industry. Without those key drivers being a help to many in the industry, business owners and those who lead organizations are required to find solutions which will allow them to survive the negative environment we find ourselves. How you persevere and deal with the issues your business faces today will have a long-lasting effect on your business and for all the people who work for you. The various steps that you’re taking now will unquestionably determine whether your company will be able to take advantage of opportunities that will certainly exist in your market when the key drivers turn positive and business improves. What steps are you focusing on in your business to ensure that you’re in position to take advantage of your competition when the current environment begins to improve?

Ernie Els didn’t lose sight of what was most important for him to focus on during Sunday’s final round at The Open and that was his own game. He could only do his best, making the best decisions in ensuring that he played at the highest level he could which would allow him to post the lowest score possible and put him in a position to win. Ernie was able to accomplish that by changing his strategy on how he was going to play those final 9 holes. He knew he was lagging behind and that Adam Scott was leading by 4 strokes with just a few holes to play. Ernie decided that he would become aggressive in how he played those final holes. At age 42 he never lost hope that he could play with against the best golfers in the World and find a way to win. By utilizing skills he had accumulated over his lifetime; and with the help of those he surrounded himself and trusted most he once again found the path to success and to win and win a major.

It certainly isn’t easy to make the hard choices that business owners or business managers must make in order to be fully prepared for when business does improve, but those who just sit by and watch their market share dwindle as they hope for better days aren’t going to be in a position to take advantage of opportunities when they do appear. You have to be able to take an honest look at your business and assess the value proposition that your business brings to customers in your market, you have to evaluate the capabilities of your competitors and take all of the appropriate steps that you can to ensure that you are positioned correctly, which will allow you to take advantage when things do improve in your market.

Ask those people closest to you that you trust and respect for their opinions; solicit their honest views of the pros and cons of your abilities, of your company in the marketplace, ask them about their views of your fellow workers. Are you marketing your company properly? Are you just copying what your competitors are doing or are you trying new things to improve how your business operates? You can’t just sit back and hope for the key drivers to improve because they might not improve fast enough, you certainly can’t just sit back hoping that a competitor or two in your market will falter or that something else will somehow happen to improve your business prospects. You have to focus on what can you do to improve your business; without worrying what others are doing around you. What steps can you take to ensure that you’re ready when things turn positive for you in your market?

You will find that by your continually working hard to find ways to improve how you market or position your business to your customers, making sure that you have the right mix of talented people to work with you in your business and then ensuring that your business is operating as a “low cost” provider in your market that you will be prepared to find new success and to win in your marketplace when the key drivers begin to improve. Work through difficulties and obstacles that you face so that you can persevere.

Admittedly, sometimes even by working hard and being dedicated to your business things may not work out for you, but you can’t stop trying. Ernie Els never gave up on his goal. He believed that if he worked hard and continued to tweak his game; he’d find a way to beat his fellow competitors and win again.

So can you.

Just Sayin’……

 

84

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Leave a comment