John King is retiring this year as the Vice President – Aftermarket at Sika Corporation. In his role at Sika John has been a key influencer in the auto glass repair and replacement (AGRR) industry both in North America and the world. I wanted to get John’s thoughts on the industry prior to his retirement and he agreed to talk.
Thank you for taking the time to talk again John. I know that you’re going through some changes in your life. You saw an auto glass installation for the first time in 1997 and a lot has changed since then to today. As you prepare to depart an active role in the AGRR industry can you tell us your view of the state of the industry as it relates to the safe installation of auto glass?
John King: For Auto Glass Retailers that continue to provide their Customers with Safe and Cost Effective Glass Replacement and Repairs, the future is bright, as there will always be a need for quality work.
Do you feel that there are more safe installations done today for consumers versus when you first entered the industry in 1997?
John King: Statistics like this are difficult to define, as it becomes more of an observation and opinion, than fact based. However, Economics always drive business decisions, and unfortunately, for the Auto Glass Industry, the Economics of today are much more stressful, than in 1997. For a number of reasons, the size of the Replacement Industry has shrunk over the past 7 years, resulting in a competitive climate that has far too many Glass Shop Companies and Independent One-Off Installers making Installation decisions based solely on the Revenue then need to survive. When that happens, Safe Installations take a back seat, to getting the job done cheaply. While “cheaply” does not necessarily mean incorrectly, it can mean that shortcuts in an installation may occur; “Slipping the Cowls, Short Urethane Beads, Incorrect Use of Priming Systems, No use of Priming Systems, and Not Holding the Vehicle until it is safe to Drive, are all symptoms of an unsafe installation”.
Unfortunately, I still believe that far too many Installers sacrifice a Complete Job, for a Quick Job. Therefore, my answer is that today, that are still far too many unsafe installations being done.
On the bright side, those Shops and Installers that are doing a Complete Job, have vastly improved since 1997. There is more adequate training available today, and for quality installers, who have kept up with training, and who are using the latest technologies of Urethane and Installation Equipment that better equip the Technician for making a Safer Installation, they are light years ahead of the best installs of 1997.
Do you think more needs to be done to ensure that replacements are being done correctly and are there any further steps you feel should be taken to ensure that auto glass is installed safely?
John King: No one likes or wants Government Intervention. However, unless the Industry takes it upon themselves to collectively raise the “bar of performance” when it comes to proper installations, it will only take a high profile auto glass installation related death, to raise the awareness of the Public and those that Govern to actively do something about it.. The Television Program 20-20, that aired 12 years or so ago, raised awareness for a period of time, but unfortunately, that awareness petered out and the public is still at risk. Quality Glass Shops who can “prove” to the Insurance Industry that they do perform Safe Installations, will be rewarded with business in that segment of the market. Glass Shops who implement and use “Net Promoter Scores” and track their Customers’ Satisfaction and Continue to Train their Technicians will be doing what the Consumers need them to be doing.
The Cash Market is another issue, and because it is structured differently and because there is “little to no quality barriers” for someone to enter the Auto Glass Industry, Consumers that utilize the Cash Market vs. the Insurance Market are subject to the unknown.
Have you any advice or hopes for the industry?
John King: Again, there will always be a need for Quality Work in an Industry. Just look at what 2014 has brought to the Automobile Manufacturers, with record numbers of Recalls. Consumers now have the lowest confidence ratings ever for Car Companies and those Manufacturers will only change that conception when Recalls are reduced. Auto Glass Retailers, Glass Manufacturers, Installation Equipment Makers and Urethane Producers need to work together to ensure the Public gets quality installations. There are many great people within the Auto Glass Industry and I believe that those committed to providing Safety will win their fair share.
Fill in the name of who is replacing you at Sika. I know that you’ve been transitioning him into your role as you are nearing retirement. Will there be any changes in direction for Sika?
John King: Mr. Marius Mavrodin replaced me, effective July 1, 2014, although I have still been consulted on important issues. That followed 5-6 months of us working very closely together so that he understood the Industry and our Customer Needs as much as possible. Marius has been with Sika for a number of years, so he knows our capabilities and he is blessed with an Organization that works very hard to provide Quality Products, Services and Support to our Customers. I know there is still room for improvement in what we do and Marius will lead this cause.
As an avid golfer I’m sure golf will play a major role in your retirement. Do you have any other plans you’d care to share?
John King: For the short term, my wife Marilyn and I will take a couple of months to catch our breath. The last 45 years together have flown by and we have been blessed with 5 wonderful children, with the Grandchild count, now at 4. They have been and will continue to be our major focus. It is not so much that I want to retire, but rather, I don’t want to work 50 hours a week anymore.
Fortunately, there are some opportunities for me that might take root. While deciding that, Marilyn loves to play golf as much as I do, and that is a major blessing. We will stay active in Church and Charitable Activities and perhaps do a little travel, but the one thing I will not miss are Planes, Trains and Automobiles, if you catch my drift. I will miss the People, for they have made it all worthwhile, and to all whom I have encountered over the years, I am truly grateful. And lastly but most importantly, I thank My Lord and Savior, Jesus Christ, for looking after My Family and I. We would have been lost without Him.
Thank you very much for your thoughts and insights John. You have provided great leadership to the auto glass repair and replacement (AGRR) industry and I’ve certainly valued both our business and personal relationship. You will be missed by our industry. I’m sure everyone wishes you the best in your retirement and/or the new opportunities that await you.
I was honored at Auto Glass Week™ 2014 to present John with an inaugural AGRR industry award. The award begins a new tradition through which the industry honors an individual for the body of their contributions through the years. The award was once known as the Len Stolk Award (as you will remember Len was an individual focused on the advancement and education of all facets of the AGRR industry). John was an excellent choice to receive this inaugural award.
Photo courtesy of http://www.glassbytes.com
Welcome John King, Vice President – Aftermarket at Sika Corporation. Sika celebrated its 100 year anniversary in 2010, a true testament to the quality of their products and dedication to their customers. Sika has developed product systems in the automotive, construction, and industrial markets with a continuing focus on safety and sustainability. In the AGRR world, Sika produces adhesives for sealing and bonding windshields in the aftermarket auto glass industry that meet and/or exceed OEM (original equipment manufacturer) requirements.
What changes have you seen in the auto glass world since you first joined Sika and began working in this industry?
John King: My first exposure to an Auto Glass Installation, was in 1997, in Zurich Switzerland, where I saw the Technician wearing a shirt and tie, and a smock. This was how this tech dressed every day. To him, his job was his profession. While I certainly do not think that USA Installers need a dress code, I do see that many glass shop companies want to “raise the bar” of customer perception, installer performance and the glass shops’ commitment to safety, within our industry. I firmly believe that this country has many technicians who are committed to this cause, and take pride in their work. Unfortunately, over time, I have seen far too many technicians that care little about quality work, and even less about safety. We have an Industry with an extremely low “barrier of entry”, meaning that anyone can put a phone number on the side of their truck and advertise auto glass repair and/or replacement. However, that does not mean that they know what they are doing, and both the Public and Insurance Industry, know little about how to discern the difference between those who care and those who do not. As our country’s economic conditions have worsened, our industry has become a haven for persons looking to find some type of income. While it does not mean that those techs necessarily perform improper installations and repairs, we have to ask ourselves, have these new industry participants been trained? How are they kept abreast of the ever changing details of vehicle glass replacement? How many of them even care to know anything about “doing it right”?
What changes would you like to see in the future?
John King: Some States have talked about “Licensing” of auto glass technicians. While I do not want glass shops to have to spend any more money then necessary, we have to ask ourselves, “How can we raise the barrier-of-entry into this industry?” Licensing may be one avenue of doing this, while at the same time, providing a means of “raising the bar of safety” within AGR. In any industry where the safety of the public is at stake, there are usually steps that those industry participants must take to first, truly understand what their work is to accomplish, and then secondly, prove they are worthy of doing the work. In essence, become Industry Certified. In AGR, the goal should be to provide correct and safe auto glass installations, meaning the vehicle’s passengers should not be placed at risk after their vehicle is returned to them. Today, responsible Glass Shop Companies take this task upon themselves. They see to it that any new technician receives adequate training, and spends time observing experienced and qualified technicians, before turning the new techs loose, to do jobs on their own. The question to all of us should be, “How does the Public and or the Insurance Industry know that adequate training has taken place?” In today’s AGR market, Glass Shop Companies spend their CSR’s time or their Outside Sales Rep’s time trying to convince prospective customers that “their installations are safer than their competitors”. Unfortunately, there are many Glass Replacement Companies that are either ignorant of a truly safe and quality installation, or they are outright lying. Licensing, which would include testing and certification, may be one of the ways to accomplish industry wide compliance of correct installation standards.
How long have you worked at Sika, and what do you find most rewarding about your job?
John King: January 1997 is when my career at Sika began, and I must admit it took me a while to have an understanding of how this industry works. However, without a doubt, the most rewarding part of the business is getting to know people. There are always business issues, business problems to solve, and strategies to implement, but at the heartbeat of this industry, is its’ people. For me, there is nothing I like to hear more, than an unsolicited positive comment about how our Sika people are perceived by customers. Whether Distributors or End Users, if our salespeople, or our customer service department are liked and appreciated by customers, that means that more than half the battle is already won. The bottom line, is that most people, want to do business with good people. Therefore, if we can hire honest people with good interpersonal skills, and then adequately train them, and provide our customers with quality products, in the end, our sales people will provide excellent service and support to those customers, which would be ultimately rewarded with an ongoing business relationship.
Sika recently created a great animated cartoon called, “No Shortcut to Safety.” It’s a wonderful tool for glass installers and consumer alike, and describes the process of safe windshield installation without using laymen’s terms that can sometimes feel unfamiliar to people who don’t speak AGRR garble.
John, why did Sika Corporation feel it was important to develop this animation video?
John King: The AGR Industry is a cross section of groups. We have the makers of product, the distributors of products, and the users of products, and those who need those products and services, who are collectively the Consumers, or Fleet Customers, or Insurers. Communicating to a wide array of groups, with a single message, is always a challenge. Our message needed to be part technical, part educational, part logical and if possible, part entertaining. Most groups can understand all 4 parts of the message, if the message is short, and studies indicate, even with very intelligent persons, that 4 minutes is tops, to maintain someone’s attention. We investigated a number of ways to develop and communicate our No Shortcut to Safety message, and when we came across the animated concept, it made sense to use the video’s simplicity. We also found from experts in video communication that presenting a new message with an entertaining format, also maximizes the listeners retention of the subject matter; hence a cartoon format.
What were your goals and target audience for this important message, “No Shortcut to Safety?”
John King: The message was still the key objective, and a message of a Safe and Reliable auto glass installation needed to be created and delivered to the Shop Owner, the Technician, and their Customers. .
How would you like to see this video utilized? In other words, what do you feel is the most effective way to reach out to drivers to educate them about safe windshield installations?
John King: Ideally, it is a combination of utilization of the video. First of all, we know safety is important to most consumers. This video has been shown in glass shop waiting areas to hundreds and hundreds of vehicle owners, and feedback from them has been exactly what we desired. They have told those glass shops that they understand what they are doing for them. Nothing has been more rewarding than reaching the Public with this message of No Shortcut to Safety. Currently, glass shop waiting rooms are still the most common place where the message is shown. However, with smart phones and the internet, we would hope to experiment with some glass shops being able to forward this video, to their customer, once they have scheduled a job. The video then acts as an explanation to that customer as to what they should expect, when the job gets done. This approach could then create a real value added marketing piece for shops to make the whole glass replacement experience, an even better one for their customers.
Thank you for joining us John.